Setting Up Your Push UpConnect

Get to know and understand the Push UpConnect! Follow our step-by-step instructions, and start pushing through to your stronger side. 

1. Charging your Push UpConnect

• Plug the USB cable into a power adapter.
• Plug the USB-C end of the cable into the base of the Push UpConnect. 
• Plug the power adapter into a power outlet and charge for at least 3 hours before use.

2. Turn on your Push UpConnect

• Before use, plug in and charge the Push UpConnect for at least 3 hours. 
• Wake up the Push UpConnect by touching the handle or gently shaking the device. The LCD will enter the main interface display after showing the word “JAXJOX” for 2 seconds.
• Grab both handles firmly. Assume a standard pushup position. Once you perform more than two pushups, reps and times will be shown on the LCD. 
• Once your workout is complete, the LCD will display the number of push-ups, sets, and total exercise time.

3. Set Up Your Push UpConnect

• Place the Push UpConnect on a stable, flat surface. The Push UpConnect has four holes on the left and right sides of the base. With a handle in each hand, firmly push the handles downward into holes on the base (one on each side of the LCD screen).
• Be sure to install them symmetrically to ensure even weight distribution and proper form. For a closer grip, install the handle using the innermost hole on each side. For a wider grip, use the outermost holes. And for standard width, use one of the middle two holes. To determine the best width, perform practice repetitions from your selected position, and adjust accordingly.
• After you push the handle down into the holes on the base, you should hear a click. This indicates that the handle is set. If you hear no click sound, turn the handles left and right until you hear it click. Pull upward on each handle to ensure each one is securely attached.
• To adjust the handle angle, lift it from the base and install into one of the holes, at the angle of your choice. If there is a click sound during the operation, the handle will be secure. If there is no click sound, turn it slightly to the left and right until it clicks at your selected angle. Be sure that the two handles are situated symmetrically.
• Lift the base from the sides. Do not lift the base by the handles. 
• The handles can be lifted vertically to remove.

4. Syncing with the App

The JAXJOX Push UpConnect is compatible with mobile devices that support IOS and Android. To get the most of your push-up device, install the JAXJOX app and connect it to your equipment. To sync your device, make sure your Bluetooth is enabled on your phone.

Open your JAXJOX app and go to your profile by clicking the image icon at the top right of your screen. Then click ‘My Devices’ and ‘Add New Device.’ Be sure that the device is charged and nearby. Click ‘Connect’ once the device is found. The Bluetooth symbol will no longer flash after a successful connection.